John Deere Bulldozer Face Seals in Hawaii - We're the premier distributor of Loader Attachments in Hawaii. Our qualified Hawaii staff of parts specialists are prepared to help you purchase the parts you need.
This particular series has a load capacity of 8 to 12 tons. The LC1100 cranes provide a 5 to 8 ton load capacity, whilst the larger LC2100 model supports loads from 12 to forty eight tons. Furthermore, the LC1600 family brings together the advantages of both series which shares a range of factors.
Linden Comansa's Flat-Top modular system was designed for the LC 2100, and is currently in all the tower cranes built by the company. This series incorporates many innovations in the specific equipment.
There are 4 Flat-Top cranes within the LC 2100 series. These cranes have the denominations of 21 LC 290, 21 LC 550 and the 21 LC 400. The newest addition to the series is the 21 LC 750. The 21 LC 750 crane is the largest in the series. It is outfitted with 7 tons of jib-end load and 80 meters of jib length. This tower crane offers a maximum load of 48 tons.
Comansa offers the LC3000 series that is formed by 2 models, the 30 LC 1400 and the 30 LC 1100 and each one is available with 3 different versions depending on their maximum load capacity. The ranges of load capacities are thirty two, 48 and 64 tons or 70,550; 105,820 and one hundred forty one thousand ninety lbs.. The largest Flat-Top tower cranes have been designed mostly for public works, heavy industry, mining and construction applications.
You could normally find pneumatic forklifts in warehouses and shipping operations. Also called pump trucks or pallet trucks, they are used in order to transport products and supplies around on wooden pallets using metal forks that are mounted on a wheeled counterweight. The counterweight has a pump that lifts the forks off the ground. A pallet truck is designed to be operated by one individual.
To be able to avoid loosing control while raising heavy loads, pallet trucks should always be operated with care. Equipment must be checked prior to operating. Clear the wheels area of any obstacle. Check that the handle turns smoothly. The pallet should be carefully stacked to ensure that nothing will fall off during transportation.
To be able to lower the forks and release air in the pump, squeeze the lever found on the inside of the metal loop on the end of the pallet truck's handle. The forks can then be pushed into the slots of the pallet. The forks should be in the middle to ensure even distribution of the pallet's weight across them. Raise the forks from the ground by pumping the handle of the pneumatic lift until the pallet has completely cleared the ground. Do not lift the pallet very high or the forklift could unbalance.
