Volvo Excavator Boom Cylinder in Hawaii - aiming to acquire OEM or aftermarket Loader Components which can be supplied in short order. We have got access to scores of organizations throughout the country and can easily supply all of your used and new equipment needs.
Inevitably, forklift parts will eventually wear out and need replacing. The alternative of acquiring brand new parts could become costly so one more idea is to purchase used components. This can save a lot of money in the end. It is a good idea to buy used forklift components that have been reproduced. These parts will ensure that you are getting parts that will work for a long time and be productive.
Remanufacturing Vs. Rebuilding
Remanufacturing worn out or broken components is a more cost effective method in general than rebuilding. With rebuilding components, just the parts which are broken or worn out get replaced, which means that other wearable components might break down soon after acquisition.
Remanufacturing however offers the best guarantee for second-hand components. Reproduced components are taken apart and cleaned and then all wearable pieces are replaced. All wearable components are replaced regardless of age or wear which is one more rationale why remanufactured parts on the whole perform so much better. Any component within the part is brand new and this provides much longer life to the used part. Depending on the lift truck parts that are being redone, the cleaning process and the complete remanufacturing process would vary.
Replacing and Testing Components
After complete disassembly, the engines are oven cleaned. Different components of the engine like pistons, spark plugs, rings, valves, valve springs, and filters can be replaced during the remanufacture process. The engines are hot tested after reassembly to guarantee that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are disassembled, oven cleaned and pressure washed. A thorough examination is performed so as to check for any cracks. Bearings, bushings and seals are all replaced. Normally, the replacement components utilized on transmission components meet OEM specifications.
Wearable components
Some components like for example the water pump, torque converters, the alternator, the starter and steer axles could obtain longer serviceability after being reproduced and having all wearable components replaced. The electronic control in the electric lift truck is maintained by the control card. This particular card can even be remanufactured with replacing all aged and worn out parts. Not like other lift truck components the control card can only have the worn and aged parts replaced.
OEM Specs
Components that are reproduced have to be comprehensively inspected upon reassembly to ensure they are in good condition previous to being sold. When buying these parts, it is a good idea to make sure that they have undergone all of the proper testing and inspections. On certain larger components like for instance steer axles, engines and transmissions, OEM specification replacement components should be used.
The lift truck dealer can guarantee that the parts they have reproduced meet the OEM specifications. This would likewise ensure the parts meet industry standards. A lot of details go into remanufacturing used components. This attention to detail provides more serviceability out of remanufactured parts than the parts that were only rebuilt.